Home Products Graco Chemical injection pump Wolverine
Chemical injection pump Wolverine
Graco

Chemical injection pump Wolverine

Injection pumps chemicals DC and AC series

For injection of chemicals in wells and pipelines facilities to protect against corrosion, clogging and freezing.


Injection pumps chemicals Wolverine reduce emissions and have a greater level of control when used with our controllers injection rate. These injection pumps are designed for a maximum of two years of operation before having to realizarles simple repairs. Each pump has an adjustable packing fluid that lasts up to 25 times more than non-adjustable seals.

 

CHARACTERISTICS

  • Designed to operate in environments from -40 ° F to 175 ° F (-40 ° C to 79 ° C). Wetted parts are 316 stainless steel, plus they are sealed to prevent ingress of water and dust.
  • Flow rates up to 430 gpd (1628 lpd) and a nominal pressure up to 10,000 psi (686 bar, 68.9 MPa).
  • Long-lasting seals can be easily replaced on site in less than five minutes.
  • Stroke adjustment accurately between ½ and 1 inch (12.7 mm to 25.4 mm) ensures precise injection rates.
  • Seals the valve and piston packings with HNBR, FKM, FFKM FKM ETP and can handle some of the most aggressive Chemicals.
  • Transmission low friction to optimize the electrical efficiency, reducing the load on the power system.
FLOW CONTROL & MEASUREMENT

Select language

Choose the language you want to use.